A guide to recharging your car AC in 15 minutes

Almost all the cars today come with an air conditioning system. An AC is considered to be an important part of every car and it is especially required during the summer time. Most of us at some time or the other have faced the situation where the AC of your car doesn’t feel as cool as it should feel. Well, there is an absolute possibility for such a situation to occur.

A car AC comes with a path which is called the refrigerant which is responsible for blowing cool air. As the refrigerant gets old, it starts to leak and in return, the performance of the car AC goes down. Before we jump into the details of fixing this week, let us first take a look into the steps to recharge your car quickly.

How to recharge your car AC?

Recharging your car AC is actually an easy task, if only you know the right technique. With the help of the steps that are given below, you can recharge your car AC within a matter of minutes. Before we look into the steps, let us first learn the things that you will be required to do so. You will need:

  1. 2 bottles of refrigerants.
  2. A pair of glasses.
  3. A refrigerant dispenser.

The steps that you need to follow include:

  1. Once you get all the items ready, the first thing that you need to do is wear your glasses and then put the refrigerant in the dispenser, after which you are required to screw it in.
  2. The next thing that you need to do is check whether the compressor of your car is running or not. For that, you need to start your car engine and the AC. You are required to keep the fan at maximum. The next thing that you do is open the boot of your car and you will notice a cylindrical device connected to your car engine. Well, that is your compressor. If the central part of the compressor is paining then you can be assured that it is working. However, if it is not spinning then you can either use the refrigerant or call an auto repair shop for help.
  3. The next thing is to find out the fill port in your car and then put the refrigerant by using the dispenser.
  4. In this step, you are required to add the refrigerant which can be a bit tricky. Therefore, you are required to be a little careful with this step.
  5. While you are adding the refrigerant make sure that you monitor the pressure as well. The dispenser usually comes with a table that will let you know the maximum and the minimum pressure that is acceptable for this job. You are to make sure that the pressure level is within the minimum and the maximum range.

Well, these are the steps that you are required to follow in order to recharge your car AC in less than 15 minutes. It is an inexpensive process if you can follow the steps mentioned above correctly.

Leave a comment
Stay up to date
Register now to get updates on promotions and coupons.

Shopping cart